Tel/whatsapp/wechat:+86-13674998188 (24 hours online)
Add:Economic And Technological Development Zone, Zhengzhou, Henan, China (Mainland)
It is well known that over time, the overall performance of large tire recycling plant will decline. In order to ensure the performance of the tyre recycling machine, the tire shredder can run smoothly during the work, and it must be properly maintained.
How to improve the performance of the shredder after the performance of the tyre recycling machine is reduced?
Here's how to improve and maintain the performance of the shredder:
If the waste tire recycling machine is used frequently, it is especially important for maintenance.
When using the equipment, a work inspection plan should be established to check the condition of the equipment and clean up the tearing equipment.
After the end of each day, check the looseness of the screws and the wear of the vulnerable parts such as claws and sieves, and carefully clean the materials to be crushed.
It is strictly forbidden to mix tire parts such as copper, iron and lead into the crushing chamber. Grease is often added to the bearings of the equipment to increase lubrication and make the equipment run smoothly.
The tire shredder should be placed in a ventilated position to ensure thermal energy and extend its life.
The lubrication of the bearings should be regularly lubricated.
Check the tool screws regularly.
After using the new machine for a period of time, tighten the screws of the movable fixed tool with the tool to strengthen the fixing between the blade and the tool holder.
In order to ensure the sharpness of the tool, the tool should be checked frequently to ensure its sharpness and reduce the unnecessary damage of the blunt blade to other parts.
Before the second start, the remaining debris in the nacelle should be removed to reduce the starting resistance.
The inertia cover and pulley cover should be opened periodically to remove the ash outlet under the flange to prevent the powder discharged from the crushing chamber from entering the shaft bearing.
The tire recycling machine should be well grounded.
Regularly check if the shredder belt is loose and tighten in time.
Yuxi Machinery is a professional manufacturer of tyre recycling machine.
The tyre recycling plant we produce has three modes, manual mode, semi-automatic mode and fully automatic tyre recycling machine .
At the same time, single machines such as tire shredders in the tire recycling plant can be sold separately to meet your special requirements. All of our machines support specialized and customized services, with a wide range of products, good quality and high output.