Tel/whatsapp/wechat:+86-13674998188 (24 hours online)
Add:Economic And Technological Development Zone, Zhengzhou, Henan, China (Mainland)
People in the industry must know that the waste tire shredder machine is "essential" in the manufacturing process, that is, there is a little error, and the relative error is negligible.
If some errors are large, it cannot be said to be an error. It is an unqualified product.
For example, the welding gap is large, and such a tyre shredder finished machine is definitely not strong. The process used in the future will definitely affect the life of the machine.
Therefore, when purchasing equipment, be sure to check the so-called errors that exist in the machine, and never let the unscrupulous manufacturers start to make sure that the unqualified products are blinded by the two words of error.
During the processing of the tire shredder, the change in the size of the tool wear directly affects the size of the positioning, causing errors.
This error is the error of the tire shredder blade and tool misalignment.
Obviously, this is the error caused by the misalignment between the positioning reference and the process reference, the size of which is equal to the dimensional tolerance between the positioning reference and the process reference.
This directly affects the effect of the finished product. The pulverized particles fed back by the customer are not uniform, and the smashing tire has a blockage phenomenon, which is a problem of the cutter head and the props.
The solution is to check the tool wear situation in time, to check if there is any running-in condition, and to change the tool in time to avoid the formation of error in the reference position and bring unnecessary trouble.
Yuxi Machinery tire shredder, using cutting tool for shearing, tearing, squeezing working principle process the material, crushing different solid waste, and good effect for hard and soft materials.